We are able to supply more than 60 different hollow cathode lamps of both 37mm (1.5") and 50mm (2") diameter, a variety Deuterium lamps and High Intensity Hollow Cathode Lamps for use with most available spectrometers.
High Intensity HCl 50mm (2")
HCl 50mm (2")
High Intensity HCl 37mm (1.5")
HCl 37mm (1.5")
Deuterium Lamp (Background Correction)
Specifications
Start Voltage: d350V
Background: The background strength near the main analysis line is lower than 1% of the analysis strength
Time for warm-up:<30min, usually from 5-15min
Stability: Baseline drift of copper lamp within 30min<1%, baseline drift of lamps of other elements within 5min<1%
Noise:<0.3%
Service life: Lamps with common elements e5000mA. H, lamps with fusible and volatile elements e3000mA. H
Maximum working current: From 10-20Ma
Advantage:
1. High Intensity: Karaltay lamps are specially designed to emit high intensity at the recommended operating current, resulting in low S/N ratio.
2. Low Operating Current: Our lamps may be operated at only half the instru¬ Ment manufacturer's recommended current for sufficient intensity, resulting in long lifetime of the lamps.
3. Design: Our lamps are specially designed to meet or exceed requirements for various types of AAS, and to provide low detection limits for your most dif¬ Ficult analysis. We also manufacture Argon and/or Neon gas-filled lamps.
4. Quality Control: Karaltay utilizes Total Quality Control (TQC) to monitor, control and inspect every single step of the hollow cathode lamp manufac¬ Turing process. The materials are carefully selected in our manufacturing to avoid spectral interference from the fill gas or impurities in the cathode material.
5. Wide Selection: Single-element & multi-element lamps.
Karaltay's HCl can be used in Atomic Absorption Spectrometers manufactured by:
Perkin-Elmer, coded and uncoded Varian
BUCK Scientific
GBC
Hitachi
Shimadzu
Thermal Jarrel Ash IL
Unicom LEEMAN Labs Phillips