Solar Road Stud (Aluminum Battery)
_with both LED solar and reflector
Model No.: RSAS-1-R (one way)
RSAS-2-R (two ways)
Size: 105*105*25mm
Weight: 0.4kgs
Package: 36pcs/Carton, Size: 38*27*28cm, 32600pcs/20FT CTNR
MOQ: 100pcs
Key features:
1. Combine active radiation by solar energy with passive reflecting light by reflectors.
2. Anti-heat battery can undertake high temperature even on the equator.
3. High seal technology guarantees the elements inside to be separated well against water in super strong compressive resistance aluminum shell.
Technical specification:
Item Description
Solar cell Type Mono crystalline
Voltage 4V
Current 65MA
Battery Type Anti-heat Ni-MH
Voltage 2.4V
Capacity 600MAH(Flash) 800Mah(steady)
Circle life 1000 circle(over 3 year)
Working temperature -20C-+70C
LED frequency 4Hz or steady
Size ¦µ5mm
Number 2X2PCS
Color White, yellow, red, blue, green
Luminous intensity 8000-10000mcd
Control circuits IC
Operating time (single-side) charged in the sun for 8 hours available for 72 hours' blinking lighting and 32 hours' constant lighting
Compression resistance over 10 Ton
Starting intensity 500 LUX
Application situation Edge line
Life in use 3 year
Warrant 1 year
Material of body shell: Aluminum alloy
Material of solar panel shell: PC
Material of reflector Acrylic
Material of body inside Epoxy glue
Water proof IP68
View distance: Over 500m
Installation Procedure:
1. Check if the solar stud charge and discharge in normal way;
2. Identify the place and distance for installation and clean road surface;
3. Clean the bottom of the solar stud and stick it onto the ground;
4. Don't put solar studs into use till 4 hours later when they are totally dry.