Fume Hood (CIMG2329)

       
Order number   
  Product Recommendation

Type of Hood: Bench Hood
Overall dimensions: 1500*800*2350mm
Sash: Vertical rising type
Work Top: Chemical Resistant Laminate
Cupsink: Oval shaped PP Cupsink
Inside Lining: 4mm thickness of Compact.
Utility Service Fitting:
One left side: Gas Valve: 1 No
One right side: Water Valve: 1 No.
Eletrical Fittings:
15 Amp Switch with theree Sockets
1)Double Wall Construction:
Fume Hood sides shall be of double walled construction to enclose structure, service piping, sash mechanism, electrical wiring, air flow monitor etc. With suitably designed removable covers to provide access for inspection and maintainance. All side panels shall be removable. The structural design shall be such as to avoid load on end panels.
2)Material of Construction
The material of construction for Fume Hood interior is 4mm thickness of Compact.
Work Surface is 12.7 mm Wilsonart Protector.
3)Sash:
Fume Hood have vertical sliding clear safety glass sash of 6mm thickness. The sash operate in rope over ball bearing pulleys. When in closed position, the sash rest on top of the bottom airfoil and when fully raised, a clear height of open face is 750 mm. An additional view panel of 250mm above sash is provided. There is a provision of cable manager below the sash. For hood, the sash is combination of horizontal & vertical sliding.
3) Noise & Face Velocity
Noise: ¡Ü60dB (international standard). The exhaust system, consisting of existing exhaust blower and PP-FRP ducting fixed on the terrace, should be connected with the fume hood. The exhaust system maintains an average velocity of 0.5 m/ sec throught open face of the sash. All the fittings/baffles are used accordingly in the connection of the system.
4)Utilities
The PP cup sink with a 1 way wall type water outlet installed in the hood. 'Kerric' Brand of full-copper water outlet which is special lab purpose water lap, whose valve core adopts international general porcelain core and its surface is treated by epoxy resin powder spraying. The PP cup sink and drain are of the approved abality by the Engineer-In-Charge. The drainpipe from the sink is of 2' size and is laid till the main drain below the hood.
5)Taps and Control Valves:
There shall be a provision for water, compressed are ad vacuum taps. All the three taps shall be controlled from outside. The controls shall be on the left on front face of the Fume Hood.
The supply shall include 2 mtr of flexible pressure tubing of 1/2' dia and 12 kg/cm2 pressure rating, for connection to laboratory service lines. On end of the tubing shall be joined to the tap using a cramped 1/2' BSP size nut ( similar to pressure hose) and the other end to the header line by another cramped nut. Three numbers of such arrangements are required for air, water & vacuum.
6)Light: 30w fluorescent lamp, at least 300LUX.
7)Air exhausting cover: 10 inch outlet.
8)Modularity:
The Fume Hood is designed in such a way that it can be assembled or disassembled easily. It shall be made preferably in two parts i. E. Upper Unit & Lower Unit.

  Policy
Add the item(s) to the cart and check out online with Western Union,VISA, bank transfer or PayPal. Buyers only need to pay the purchase price and Shipping fee, usually without any customs duties. Volume orders will receive a discount price.
Delivery: DHL, UPS, DPEX, FedEx, EMS, TNT, etc. About 2-3 business days to complete shipments.(Delivery against Payment.)
More ...
Product Information
Name:
Fume Hood (CIMG2329)
Code:
Quantity:
Min. Order:
1
Quality:
Warranty:
(No more information)
Materials:
Type:
CIMG2329
Color:
Per Package:
1/Packet(Pricing units:)
Packaging Materials:
Net Weight:
(g)
Each packet size:
Garner:
Origin:
State:
hot-selling
Show times:
49
Manufacturer:


OtherProducts
Keyworks

Tags
Fume,Fume Hood,Hood,Fume Hood (CIMG2329),CIMG2329